Type KZ Slurry Pump
Type KZ is a single-stage , single-suction, boom centrifugal pump. They have the advantages that: high efficiency, reliable running, easy disassembly etc. They are suitable for pumping ore pulp with concentration of 60% by weight and mortar with concentration of 45% by weight with temperature low than 60℃.They are widely used in mine , metallurgical industry, coal industry, power plant etc.

 

Performance Range: Flow: 7.2—151/h
  Head: 5.5—40m
Type PN, ZD, PNL, ZDL Slurry Pump
Type PN, ZD, PNL, ZDL pumps are single-stage centrifugal slurry pumps. Type PN, ZD are horizontal and type PNL, ZDL are vertical. They can be used in metallurgical industry, mine coal industry, power plant, paper mill, textile industry, and feed-processing industry for delivering gritty mixtures which contain corrosive solid particle with concentration of 65% by weight.

 

 

Performance Range: Flow: 7.2—151/h
  Head: 5.5—40m
Type PNJ(F), 8PSJ Rubber lined Pumps

Type PNJ(F), 8PSJ pumps belong to single-stage centrifugal slurry pumps. They are suitable for handling various kinds of mineral slurry and corrosive slurry. Type PNJ(F), 8 PSJ pumps, perfect designed, reliable running and good quality, are widely used in mine , metallurgical industry, coal industry etc.

Performance Range: Flow: 27—704/h
  Head: 19—43m
Type IH Standard Pump for Chemical Industry
Type IH standard pump centrifugal pump for chemical industry can be used for delivering corrosive medium with viscosity similar to that of water in chemical industry. It can be used in chemical industry, petrochemical industry, metallurgy, papermaking, power plant, food industry, pharmacy, synthetic fiber industry etc. for delivering corrosive medium or other medium that can not be polluted. Medium

 

 

Performance Range: Temperature : -20—105℃
  Flow: 6.6—460/h
  Head: 12—132.5m
  Pressure: 1.6Mpa
Type RY Oil Pump
Type RY, a single-satage, single-suction, centrifugal pump. It has air cooling system instead of other cooling system.They are suitable for delivering liquid without solid particle with temperature from -20℃ to 350℃. They are widly used in petroleum industry, papermaking, plastics industry, architectural industry etc .
Performance Range: Flow:12.5—400/h
  Head: 32—125m
Type SY Salt Pump
Type SY salt pump is single stage, single suction centrfugal pump. The discharge pipe can be revolved at  9 , 18 , 27around the pump axle. The pump is suitable for delivering salt in salt site, and delivering sewage, feces, low specific gravity particle and liquid with fibre or suspension at a temperature under 80℃. It is not suitable for acid, alkaline and other strong corrosive medium.
Performance Range: Flow:54—120/h
  Head: 28—46m
Type SK ,SZ Vacuum Pump and Compressor
SK, SZ series water ring vacuum pumps and compressors are suitable for sucking and evacuating air and other noncorrosive, non-dissolvable gas and which not contain solid particle to form vacuum and pressured area in sealed chamber. A little of liquid in the gas sucked is allowable. It also can be used for elevation of small particles of solid material. The pumps are widely used in mechanical industry, chemical industry, papermaking, porcelain fabrication, food and cereal industry. Because evacuatung gas is in the constant temprrature in the operational process., it is safe when sucking and evacuating corrosive, explosive and burnable gas.
Performance Range:
Type SK
Type SZ

Max. Exhaust Valume:

1.5—28.1/min

Max. Exhaust Valume:

1.5—27 /min

Limit Vocuum:

87—92%

Limit Vocuum:

87—92%

Max. Pressure: 100Kpa(as a Compressor)

Max. Pressure: 100-210Kpa (as a Compressor)